Services

Boiler Servicing:

We recommend that boilers are serviced annually. This may be a condition of warranty if your boiler is still covered.

The following will be checked:

Gas, Water and Flue Seals
Thermostatic and Safety Devices
Gas Pressures / Gas rates
Flueways and terminals
Energy efficient combustion using calibrated Gas Analyser
The boiler components will be cleaned as required


Power flushing & System Cleansing:

"The objective is to restore systems with circulation and boiler noise problems (caused by sludge and corrosion deposits) to optimum operation. Power flushing removes these deposits and the problems that they cause."
"Power flushing, in conjunction with SYSTEM PRE-CLEAN, is also an excellent way to pre-commission clean new heating systems, to remove excess flux, swarf and other debris, and the grease and oil used to prevent rusting of components before use.
It is prudent to power flush a heating system immediately before fitting a new boiler to an existing system to prevent possible future problems. Many systems are found to contain corrosion and sludge, even if no flow problems have yet shown themselves.
Existing debris is often mobilised by alterations to the system/piping and the increased efficiency of the new boiler, and may then accumulate in the boiler heat exchanger, causing noisy operation, reduced efficiency and, in extreme circumstances, failure of the boiler. The high efficiency and compactness of modern boilers, developed to minimise fuel costs and pollution, means that they are more susceptible to problems caused by debris in the system water."

For further information, please click this link: kamco.co.uk

Landlords Certificates:
As a landlord, you are responsible for the safety of your tenants. The Gas Safety (Installation and Use) Regulations 1998 deal with landlords’ duties to make sure gas appliances, fittings and flues provided for tenants are safe.
Check appliances, pipe work and meter for gas tightness.
You are also responsible for ensuring an annual gas safety check is carried out within 12 months of the installation of a new appliance or flue which you provide and annually thereafter by a Gas Safe Registered engineer.
You must keep a record of the safety check for 2 years and issue a copy to each existing tenant within 28 days of the check being completed and issue a copy to any new tenants before they move in.

For further information, please click this link: http://www.hse.gov.uk/gas/domestic/faqlandlord.htm

Ref:
Date:
Location:
Photographer: